GSA Contract Number GS-07F-0541T

GSA Contract # GS-07F-0541T

 

HEPA-CARE® UV800F Germicidal UV Module

Germ-Killing Air-Disinfection UVGI Module for the HC800F

 

Products Catalog for Infectious Patient Isolation & Construction Dust Containment

Download the Products Catalog for Infectious Patient Isolation & Construction Dust Containment

 

HEPA-CARE UV800F Brochure HEPA-CARE UV800F Brochure

 

To speak with a Patient Isolation Specialist, call:

U.S. 800-634-9091
Canada 800-827-6443
International 678-889-4200

Mon-Fri 8 AM - 5:30 PM Eastern

Product Information e-mail:

 

Contact Technical Support

 

HEPA-CARE® UV800F Germicidal UV Module

HEPA-CARE® UV800F Germicidal UV Module

Powerful Ultraviolet Germicidal Irradiation (UVGI) Module Enhances High-Performance HEPA Air Filtration System

Abatement Technologies® UV800F Germicidal UV Module irradiates and kills dangerous infectious pathogens. The UV800F Germicidal UV Module adds supplemental irradiation to the portable HC800F In-Room Air Purification System, creating the ultimate one-two punch for purifying and sterilizing the air in hospitals and healthcare facilities.

The UV800F is equipped with four ultra-high intensity lamps (156 watts total) that generate exceptionally high levels of UVGI energy to clean and disinfect the air. Internal air baffles channel the dirty air close to the lamps and maximize UV intensity and dosage, and microorganism dwell time in the “kill zone.”

 

Easy Installation

The UV800F module installs easily onto the HC800F in just a few minutes. Simply slide it into the offset tabs of the clean air exhaust grill on top of the HC800F, and secure it in place with the included fasteners. The short UV800F power cord plugs directly into a GFCI receptacle on the side of the HC800F unit, so no separate wall receptacle is required. Once installed, there is typically no need to remove it as the UV800F moves with the HC800F.

Built-in performance features of the UV800F Germicidal Module include:

  • High-Output - Four T6-type, ultra-high output 39-watt UVGI lamps (156 watts total) generate more than 17,000 µw/cm² of UV energy at a distance of 3 inches from the lamps
  • Long Life - Lamps rated for 9,000 hours of continuous operation
  • Maximum UV Exposure - Internal air baffles maximize UVGI exposure by slowing down the airflow and funneling it closer to the lamps
  • Easy Lamp Replacement - Easy room-side access facilitates lamp replacement

Safety features of the UV800F include:

  • Complete Lamp Shielding - Prevents any direct UV exposure during operation
  • Safety Interlocks - Instantly deactivate lamps if the lamp compartment is opened or airflow is interrupted
  • Lamp On/Off Switch - Turns off lamp so HC800F HEPA unit can run with or without UV
  • NRTL-Certified - Safety certified by Environmental Testing Laboratories (ETL) to conform with applicable UL & CSA safety standards

Multiple Uses within Hospitals and Healthcare Facilities

The combination of HEPA filtration, negative pressure and UVGI disinfection is ideal for isolation rooms, ER, patient isolation during response to potential bioterrorism incidents or infectious illness outbreaks and during normal use. This combination is also perfect for disinfecting room air between patients. Uses for the HC800F/UV800F include:

  • Airborne Infectious Isolation Rooms - The most common uses are for irradiation of HEPA filtered air before it is exhausted from the room, and disinfection of room air between patients
  • Protective Environments & Operating Rooms - The UV800F can provide added protection from airborne pathogens for immune-compromised and other sensitive patients
  • Continuous Air Cleaning & Recirculation - The air in almost any room or area can be cleaned, deodorized, and recirculated back into the same area. Common areas of use include patient waiting rooms, bronchoscopy, pediatrics, autopsy and outpatient clinics

 

See the Technical Advice & Products Territory Map


Stocked UV800F Lamp Ready for Immediate Delivery

UVGI Lamp: UV425

 

 

Links for HEPA-CARE UV800F Product Information

HEPA-CARE Germicidal UV Module Brochure
HEPA-CARE UV800F Germicidal UV Module Brochure
Products Catalog for Infectious Patient Isolation & Dust Containment
Products Catalog for Infectious Patient Isolation & Dust Containment

Using Germicidal UV-C Disinfection Lamps to Supplement HEPA Filtration
Using Germicidal UV-C Disinfection Lamps to Supplement HEPA Filtration

Modes of Operation Animations
Modes of Operation Animations

ITEST Manufacturing, Testing and Labeling Requirements for True HEPA Filters IEST (Institute of Environmental Sciences & Technology) Manufacturing, Testing and Labeling Requirements for True HEPA Filters
Importance of Nationally Recognized Testing Laboratory Product Safety Certification
Importance of Nationally Recognized Testing Laboratory Product Safety Certification
Air Changes Per Hour (ACH) Calculator
Air Changes Per Hour (ACH) Calculator