ISOQUAD® IQ200 and IQ810 Bed Isolation Modules

Protects Patients and Staff and Increases Surge Capacity

 

Products Catalog for Infectious Patient Isolation & Construction Dust Containment

Download the Products Catalog for Infectious Patient Isolation & Construction Dust Containment

More ISOQUAD IQ200 Bed Isolation Module Brochure

More ISOQUAD IQ810 Bed Isolation Module Brochure

 

To speak with a Patient Isolation Specialist, call:

U.S. 800-634-9091
Canada 800-827-6443
International 678-889-4200

Mon-Fri 8 AM - 5:30 PM Eastern

Product Information e-mail:

 

Contact Technical Support

 

Home > Patient Isolation > Products > Containment Modules > Bed Isolation Modules

ISOQUAD® IQ200 and IQ810 Bed Isolation Modules

ISOQUAD IQ200 Bed Isolation Module   ISOQUAD IQ810 Bed Isolation Module
ISOQUAD IQ200 Bed Isolation Module with Open Front   ISOQUAD IQ810 Bed Isolation Module with Front Enclosure

Budget-Friendly, ISOQUAD Hospital Bed Isolation Module Deploys Quickly Providing Infectious Patient Isolation and Emergency Surge Capacity Response

The time is now to plan for infectious patient isolation and increased hospital surge capacity, not during a crisis such as the recent MERS-CoV, SARS-CoV and Ebola virus outbreaks have shown. The ISOQUAD IQ200 or IQ810 Bed Isolation Modules from Abatement Technologies® provide a fast, low-cost solution for any size bed or gurney. Each ISOQUAD unit offers in-place patient isolation to protect healthcare workers from infectious airborne pathogens and to increase isolation surge capacity in minutes. Both compact bed isolation modules are easily transportable to where they are needed in a soft carrying case, providing the answer to pandemic response preparedness at an extremely competitive price point.

Common features that make the ISOQUAD IQ200 or IQ810 the perfect solution for patient isolation include:

  • Lightweight - 25 lbs. for the IQ200 and 60 lbs. for the IQ810
  • Fast Set-Up - Pops-up in seconds. No tools required
  • Tough - Tear-resistant and flame-retardant fabric meets CPAI-84 flame spread safety standards
  • Cost-Effective - Affordable patient isolation solution for acute and chronic care hospitals, clinics and other healthcare facilities
  • Secure - “Dirty-to-Clean” directional airflow effectively contains airborne pathogens
  • Highly Adaptable - Fits virtually any size bed or gurney
  • Compact Storage - Stores easily out of the way within close proximity to patient treatment areas for rapid emergency response.
  • Portability - Easy to move in a soft carrying case with handle
  • Easy Patient Access - Provides unrestricted provider or equipment access
  • Bright and Airy - Clear PVC windows provide unobtrusive view of patient for monitoring
  • Perimeter Tape - Seals unit to the floor, adds stability and pressure integrity
 

ISOQUAD IQ200 SPECS

  • Dimensions: 6’W x 6’D x 6.5’H
  • Weight: 25 lbs
  • Three clear PVC patient viewing windows
 

ISOQUAD IQ810 SPECS

  • Dimensions: 8’W x 10’D x 6.5’H
  • Weight: 60 lbs
  • Front flap enclosure with zippered access
  • Four clear PVC patient viewing windows

 

Negative Pressure Infectious Patient IsolationNegative Pressure Infectious Patient Isolation

The IQ200 or IQ810 are commonly used in combination with Abatement Technologies PREDATOR® or HEPA-AIRE® Portable Air Scrubbers (PAS) to create negative pressure infectious patient isolation environments right in the bed or gurney. To use the ISOQUAD in negative pressure mode, connect the flex duct between the PVC collar at the rear of the module to the inlet collar of the Portable Air Scrubber (PAS). This creates negative (lower) air pressure and “foot-to-head” directional airflow within the enclosure so that infectious droplets expelled by the patient flow away from the enclosure opening. “Dirty” air is HEPA-filtered by the Abatement PAS and exhausted back into the room.

 

 

 

Download the ISOQUAD IQ200 Bed Isolation Module brochure
Download the ISOQUAD IQ200 Bed Isolation Module brochure

Download the ISOQUAD IQ810 Bed Isolation Module brochure
Download the ISOQUAD IQ810 Bed Isolation Module brochure



See the Technical Advice & Products Territory Map

 

 


Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

The highly portable ISOQUAD IQ200 weighs just 25 pounds.

 

Easy to Carry and Store

Abatement ISOQUAD Bed Isolation Modules are highly portable. The IQ200 weighs just 25 lbs. while the slightly larger IQ810 weighs only 30 lbs. Each unit fits in a convenient soft storage pouch with carry handle (76” x 8” diameter).

 

 

 

 

 

 

 

 

The ISOQUAD IQ200 Bed Isolation Module.

 

 

Fits Any Size Bed or Gurney

The ISOQUAD IQ200 and IQ810 Bed Isolation Modules
accommodate any size bed or gurney and
can be set-up in virtually any space.

 

 

 

 

 

ISOQUAD IQ200 Bed Isolation Module featires clear windows.

 

 

 

Convenient Patient Monitoring

Clear PVC view windows provide
ample light and convenient patient monitoring.

 

 

 

 

 

 

 

 

 

 

Side Ports for Pass Through of Equipment Cords and Tubes

 

 

Side Ports for Pass Through of Equipment Cords and Tubes

Side ports with Velcro covers provide a protective
pass through of cords and tubes to patient medical devices
located outside of the ISOQUAD enclosure.

 

 

 

Fast set-up with the ISOQUAD IQ200

 

 

 

 

Fast Set-Up

The ISOQUAD IQ200 and IQ810 become operational in seconds simply by “popping” out the side module into the locked position.

 

 

 

 

 

 

 

PRED750HC Portable Air Scrubber

PRED750HC Portable Air Scrubber with Rotationally-Molded Cabinet

The rotationally-molded PREDATOR® model PRED750HC Portable Air Scrubber is the perfect unit for creating negative pressure or positive pressure isolation environments within the ISOQUAD enclosure. The HEPA-filtered PRED750HC weighs only 34 pounds, yet produces outstanding peak airflow of 750 cfm on an amperage draw of 1.9 amps or less. Click to read more information about the PRED750HC Portable Air Scrubber.

   

PRED1200HC Portable Air Scrubber

PRED1200HC Portable Air Scrubber with Rotationally-Molded Cabinet

A second option for creating negative pressure or positive pressure isolation environments within the ISOQUAD enclosure is the rotationally-molded PREDATOR model PRED1200HC Portable Air Scrubber. The HEPA-filtered PRED1200HC is a more powerful unit that produces an eye-popping peak airflow rating of 900 cfm at 3.5 amps or less, yet weighs only 70 pounds. Click to read more information about the PRED1200HC Portable Air Scrubber. You can also add the microorganism-killing power of UVGI germicidal radiation with HEPA-filtration with the PR1200UVHC Portable Air Scrubber.

   
Flex Duct

Flex Duct: H2030-10 ( 10” diameter X 25’ long)

   
Locking Clamp for Flex Duct Attachment

Locking Clamp for Flex Duct Attachment: H2350-10 (1 ea.)